Simple ping sweep for all VM hosts
Shutdown cdr-vcenter1 last; need to turn off the MD3000's first
DON'T FORGET TO SAVE THE RUNNING CONFIG ON THE SWITCH GOSH DARN IT
KVM Console wasn't designed for a rack. It'll be located between 21 and 22 on Rack #1. We jerry-rigged it to some rails, so it can atleast self support itself. Removing it will require removing pretty much every server above it, as it can't slide out. Sorry. It's better than what it was before, though.
KVM console was put on a 3U half shelf. Pretty sick, but it's free floating as well. The spot above it is dead space, currently. It occupies units #21-23 on Rack #1
One of the R710's (vm7 or vm11) was put on a half-shelf, as they don't have rails. The other R710 was put ontop of the shelf.
The 2nd Rack's UPS cord is too short. We couldn't find an extension cable for it either, woop :(. It'll stay on unit #5 and 6.
We couldn't find rails to fit on vm6's R2950. We had rails from a 2850, however one of the three pins on it does not fit. We're going to attempt to grind off the first pin, so it can be held up by two of the rails
New color mappings decided
As most servers have 4 port mappings, we have decided upon the following order
Management Network
Core vDS
Team vDS
IO
Servers which have 6/8 port mappings will be unused, until decided upon
All storage servers have a LAGG between 3 ports
The following classification of servers will use the switch's management network connection
Storage servers (cdr-iscsi{1-3})
MD3000 Management Uplinks
[Possible - TBD] PLAYGROUND hosts
TODO: We will have to change the mappings on switch #2 to support the above changed port mappings. TBD tomorrow