guides:esxi_host_bootstrap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
guides:esxi_host_bootstrap [2019/07/25 01:33]
pngebura
guides:esxi_host_bootstrap [2021/10/15 21:37] (current)
sjames5 Update DNS server addresses
Line 29: Line 29:
     * Enter the correct information. See [this page](/​cdr/​networks/​management) for detailed information     * Enter the correct information. See [this page](/​cdr/​networks/​management) for detailed information
     * IPv4 Address: Check IP Ranges     * IPv4 Address: Check IP Ranges
-    * Subnet Mask: 255.255.255.192 +    * Subnet Mask: 255.255.255.128 
-    * Default Gateway: 128.205.44.129+    * Default Gateway: 128.205.44.254
   * Go to "IPv6 Configuration"​   * Go to "IPv6 Configuration"​
     * Disable it     * Disable it
   * Go to "DNS Configuration"​   * Go to "DNS Configuration"​
     * Select "Use the following DNS Server"​     * Select "Use the following DNS Server"​
-    * Primary DNS Server: 128.205.1.2 +    * Primary DNS Server: 128.205.1.100 
-    * Secondary DNS Server: 128.205.32.8+    * Secondary DNS Server: 128.205.1.101
     * Hostname: cdr-vhostX     * Hostname: cdr-vhostX
       * Do **NOT** include `.cse.buffalo.edu`       * Do **NOT** include `.cse.buffalo.edu`
Line 52: Line 52:
     * Username: root     * Username: root
     * Password: <the password you setup>     * Password: <the password you setup>
 +  * Press continue through everything else
   * Enable Lockdown Mode   * Enable Lockdown Mode
   * Configuration -> Security Profile -> Lockdown Mode (Normal, not Strict)   * Configuration -> Security Profile -> Lockdown Mode (Normal, not Strict)
-  * Press continue through everything else+ 
  
 After a bit, the host should show up in the cluster you added it to. Woot! Now, setup the reset of the network connections,​ and datastore connections After a bit, the host should show up in the cluster you added it to. Woot! Now, setup the reset of the network connections,​ and datastore connections
Line 66: Line 67:
     * VMkernel Network Adapter     * VMkernel Network Adapter
       * New standard switch       * New standard switch
 +      * Select appropriate adapter
       * Use the network label `direct-io`       * Use the network label `direct-io`
       * Use [static IPv4 settings](/​cdr/​networks/​direct-io)       * Use [static IPv4 settings](/​cdr/​networks/​direct-io)
  • guides/esxi_host_bootstrap.1564018403.txt.gz
  • Last modified: 2019/07/25 01:33
  • by pngebura